Items 1 to 10 of 43 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Set Descending Direction

How do beginners buy skateboards

Monday, July 29, 2019 11:43:13 PM America/Los_Angeles

How do beginners buy skateboards

Skateboards are divided into the following parts:

1. Skateboard surface: about 7.5-8 inch in size, with a tolerance of 0.5inch; 31-32.5 inch long.

A narrow plate surface is suitable for flipping action, wide plate surface is suitable for sliding in the U pool;

B board surface some companies have a light board, double warped board, single warped board, straight board, foot socket deep, these to their own experience. Generally, for seven layers, there are Canadian maple also has the northeast maple;

C footprints, concave

Types are divided into u-shaped foot socket and w-shaped foot socket

D board surface should not water, smudged with cloth sassafras dry.

2. Skateboard support (bridge) :

A. the main dimensions of the bridge are 5 "5.5" 7"

The size below 5.5 is used for street boards. The size of the bridge is determined by the width of the board. The wider the board, the larger the size of the bridge

A 5-inch bracket is usually used for 7 -- 7.75 "panels

A 5.5-inch bracket is normally used for the 7.75-8.5 panel

A 7-inch bracket is usually used for longboards 9 inches or more

For anything under 7 inches, such as penny boards, use a 3.25-inch bracket

In addition to size, the bridge is divided into a high bridge, middle bridge, and low bridge according to the distance from the center of screw to the bottom

B. material

The material of the bracket is generally 356 aluminum alloy, and there are some advanced brackets using magnesium-aluminum alloy, but it is very rare, because of the high cost and difficult technology.

The main part of the bridge

Suspension shaft

The base

Mid column and mid column hat

Wire up and down bowls

Up and down PU shock absorbers

The vertices

Bridge side

gasket

3. Skateboard wheel:

According to size, hardness and material are classified as follows:

A size

Street skill wheel 49mm - 56mm width in 29mm - 33mm

U tank wheel 56mm-- 62mm width in 33mm - 36mm

Longboard, brush street board wheel 60mm---85mm 36mm above

B hardness

Street skill wheel 98A-- 60D

U tank wheel 56mm---62mm 90A -- 100A

Longboard, street brush wheel 60mm-- 85mm 85A-- 90A

C material

MDI high resilience wear-resistant polyurethane

D the spring back

60% rebound R

70% High rebound HR

80% super hight rebound SHR

The higher the rebound, the better the quality, the faster the glide speed

For More Message about Skateboard Skills and Electric Skateboard Factory, please check here: https://strailboard.com/blogs/news

0 Comments | Posted By Jiayu Mobile

Jiayu S3+ MT6753 Android 5.1 Update ROM (20160222-182439)

Saturday, May 21, 2016 12:07:26 AM America/Los_Angeles

Jiayu S3+ MT6753 Android 5.1 Update ROM (20160222-182439)

Note: This ROM only for Jiayu S3+ MT6753 version, NOT for Jiayu S3 MT6752 version!

Wire Brush Jiayu S3+ MT6753 Android 5.1 ROM Download: http://pan.baidu.com/s/1nvImN9n

0 Comments | Posted By Jiayu Mobile

Jiayu S3 MT6752 Android 5.1 Update ROM (2016-1-23)

Friday, May 20, 2016 11:48:52 PM America/Los_Angeles

Jiayu S3 MT6752 Android 5.1 Update ROM (2016-1-23)

Note: This ROM only for Jiayu S3 MT6752 version, NOT for Jiayu S3+ MT6753 version!

When you update, please choose "Firmware upgrade" , Not use "format all+download" in case baseband, SN, imei information lost and lead to signal instability.

Wire Brush Jiayu S3 MT6752 Android 5.1 ROM Download: http://pan.baidu.com/s/1gfe31CZ

0 Comments | Posted By Jiayu Mobile

Jiayu S3 2GB RAM Version Android 5.1 System Preview

Thursday, May 28, 2015 3:30:04 AM America/Los_Angeles

This Android 5.1 System version only for Jiayu S3 2GB RAM + 16GB ROM version. And at present, it is an informal version which is in optimizing. The Android 5.1 OS will be more stable, supports multiple SIM card, has stronger wifi ability etc.

0 Comments | Posted By Jiayu Mobile

Jiayu S3 Android Smart Phone Language Support List

Friday, May 8, 2015 3:56:17 AM America/Los_Angeles

Jiayu S3 Supported Language

Jiayu S3 Supported Language Jiayu S3 Supported Language Jiayu S3 Supported Language Jiayu S3 Supported Language Jiayu S3 Supported Language Jiayu S3 Supported Language Jiayu S3 Supported Language
0 Comments | Posted By Jiayu Mobile

Jiayu S3 Mobile Phone Teardown Review

Monday, May 4, 2015 8:14:34 PM America/Los_Angeles

Jiayu S3 dual 4G LTE phone runs octa core 64 bit CPU, with 3GB RAM and 5.5 inch 1080P FHD screen, builds in SONY IMX214 F2.0 5P lens rear camera with dual LED lights, supports dual band wifi, NFC and OTG. Jiayu S3 not only has high specifications, but also has good workmanship. This is the teardown picture review of Jiayu S3 mobile phone.

jiayu s3 jiayu s3 jiayu s3 jiayu s3 jiayu s3 jiayu s3 jiayu s3 jiayu s3 jiayu s3 jiayu s3 jiayu s3 jiayu s3 jiayu s3 jiayu s3 jiayu s3 jiayu s3 jiayu s3
0 Comments | Posted By Jiayu Mobile

Jiayu F2 Dual 4G Version Firmware ROM 20150317

Friday, April 17, 2015 11:30:52 PM America/Los_Angeles

Jiayu F2 Dual 4G Version Firmware ROM 20150317

This version only for Jiayu F2 2GB RAM + 16GB ROM Dual 4G Version phone!

If your phone has no any problems, please DO NOT flash, as there will be some risks exists.

Release time: 2015-03-17
Version number: F2-20150313-105203

Upgrade method:
1. OTA (Don't open ROOT permission)
2. Upgrade Online (on computer)

Firmware download:
1. Flash drive and tool download: http://pan.baidu.com/s/1jGuxLUQ
2. Online upgrade download: http://pan.baidu.com/s/1mgDW7Hm

0 Comments | Posted By Jiayu Mobile

Jiayu F2 Dual 4G Version Firmware ROM 20150414

Friday, April 17, 2015 11:14:28 PM America/Los_Angeles

Jiayu F2 2GB RAM + 16GB ROM Dual 4G Version Firmware ROM 20150414

This version only for Jiayu F2 2GB RAM + 16GB ROM Dual 4G Version phone!

If your phone has no any problems, please DO NOT flash, as there will be some risks exists.

Release time: 2015-04-14
Version number: F2-20150407-190732

Upgrade method:
1. OTA (Don't open ROOT permission)
2. Upgrade Online (on computer)
3. Upgrade with TF card

Firmware download:
1. Flash drive and tool download: http://pan.baidu.com/s/1jGuxLUQ
2. Online upgrade download: http://pan.baidu.com/s/1nth16Nf
3. TF card upgrade download: http://pan.baidu.com/s/1dDyCOgh

0 Comments | Posted By Jiayu Mobile

Jiayu S3 2GB RAM + 16GB ROM Version Firmware S3-20150411-155027

Friday, April 17, 2015 9:09:24 PM America/Los_Angeles

Jiayu S3 2GB RAM + 16GB ROM Standard Version Firmware ROM

This ROM only for Jiayu S3 2GB RAM + 16GB ROM standard version, it can't appropriate for the 3GB RAM high-end version!

If your phone has no any problems, please DO NOT flash, as there will be some risks exists.

Release time: August 14th, 2015
Version number: S3-20150411-155027

Upgrade method:
1. OTA (Don't open ROOT permission)
2. Upgrade with TF card
3. Upgrade Online (on computer)

Firmware download:
Flash drive and tool download: http://pan.baidu.com/s/1jGuxLUQ
TF card upgrade download: http://pan.baidu.com/s/1ntJvpQL
Online upgrade download: http://pan.baidu.com/s/1o6oRd5w

0 Comments | Posted By Jiayu Mobile

Jiayu S3 White Version is Coming!

Thursday, April 16, 2015 8:44:18 PM America/Los_Angeles

Jiayu S3 white version is coming! This white Jiayu S3 is the high-end version which has the same specifications as the previous black version. It also features a 5.5 inch 1080P screen, uses MT6752 octa core processor, Android 4.4 OS, with built-in 3GB RAM, 16GB ROM, 3000mAh battery, 5MP/13MP dual cameras and supports dual 4G LTE networks and dual SIM dual standby.

Here are some real pictures of the white Jiayu S3.

Jiayu S3 Jiayu S3 Jiayu S3 Jiayu S3 Jiayu S3 Jiayu S3 Jiayu S3 Jiayu S3 Jiayu S3 Jiayu S3

Jiayu S3 special colorful back shell

Jiayu S3 Jiayu S3

0 Comments | Posted By Jiayu Mobile

Items 1 to 10 of 43 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Set Descending Direction